101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR) -52- Users Manual
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
10.2.13 SYSTEM INITIALIZE
10.2.14 EVENT CLEAR
10.2.15 CARD ID CLEAR
10.2.12 TIME SCHEDULE CLEAR
SYS INITIALIZE
SYS INITIALIZE
System
CARD ID CLEAR
CARD ID CLEAR
TIME SCHE
TIME SCHE
☞
. This operation will initialise the iTDC. Press <ENT> key, if an
initialisation is needed. (First time installation or resetting in the
event of a malfunction).
CAUTION: Initialising will erase all stored data in the memory.
☞
. Press <1> key to initialise or <0> key to cancel the operation.
☞
. This message appears while the system is being initialised.
After the initialisation, iTDC will return to the set-up menu.
☞
. When you want to delete all User ID (Card ID), you can clear all
User ID from the memory. Press <ENT> key then press <1> key
to clear all User ID or <0> key to cancel the operation.
CAUTION: Before you clear all User ID, make sure that the
registered User ID is no longer used otherwise you
may lose all registered User ID.
☞
. When you want to delete all Time Schedule (01~15), you can
clear all T/S from the memory. Press <ENT> key then press <1>
key to clear all T/S or <0> key to cancel the operation.
CAUTION: Before you clear all T/S, make sure that the stored
T/S is no longer used otherwise you may lose all
stored T/S in the memory.
EVENT
EVENT
☞
. When the event memory is full or when you want to change ID
COUNT, you can clear the event memory in this menu. Press
<ENT> key then press <1> key to clear event memory or <0>
key to cancel the operation.
CAUTION: Before you clear the events, make sure that the
stored events is not necessary to upload to the host
PC otherwise you may lose important data.
