Copyright©2010-2014,InternationalTechnologies&SystemsCorp.Allrightsreserved.
Page12of19
2. Attach the other end of the cable (220-2457-00) from the antenna to the ViVOpay
Kiosk II Controller.
Note:
Verify that the polarizing plug on the end of thedata cable isfacing towards the top of the
ViVOpay Kiosk II Controller (away from the mounting plate) before inserting the cable.If the
cable is installed incorrectly (upside-down), it willapply the wrong polarity to the LEDs and
damage them.
Connecting to Power
The Kiosk II can be powered through the serial communications port or the two-socket
power connector. If you are using USB data communications, you must power the Kiosk
II through the two-socket power connector.
By using AC to DC adapter to Connect to the white two-socket Molex connector
(mating connector Molex P/N 0039012020with 5556-series crimps) or to pins 1 and
2 of the RS232 connector (see next section).
(P.S Please don’t use DC power source for our units, and this product do not supply
the DC Jack Cable).
