※
LX505/LX505SR QUICK INSTALLATION GUIDE
20
6. INITIAL SETTING
6.1 Initialization
Initialize the system using the Initialization switch on the back of the LX505/LX505SR.
1. Check whether the power terminal on the back of LX505/LX505SR is connected or not. If it has been
connected, disconnect the power cable.
2. While holding the Initialization switch, connect the power cable.
3. While holding the Initialization switch, wait until the “Initialize OK?” message appears on the screen, (It takes
about 8 seconds) then release the Initialization switch.
4. Once pressing „1‟ button, initialization process starts and appears “Wait” message on the screen.
※
To cancel initializing the system, press „0‟
5. When the Initializing is done, you will move to the standby screen.
Caution: initialization process will restore all previous setting values to the factory setting valis. So
the Initialization should be performed by authorized person only and upload all ID information and
events data before initialization.
WAIT…
INITIALIZE OK?
1:YES 0:NO
IDTECK
Mon 01/01/2010
10:30 20
