To switch the RDS code ON or OFF:
1.
Click "
ON
" above the RDS inscription at the top left hand side of the window :
2.
The button
is placed where you want it and shows it has been
activated.
3.
Do the same by clicking "OFF" to deactivate the coder.
To switch the UECP coder ON:
1.
Click "UECP" below RDS Mode inscription at the bottom left of the window
2.
The button
is placed where you want it and shows it has been
activated.
UECP Address:
In dynamic mode it is necessary to give an address to the coder. Here, you will
define:
- the address of the site (hexadecimal number from 0 to 3FF),
- the address of the coder (hexadecimal number from 0 to 3FF),
- the speed of transmission from 2400 to 115200 bauds...
Scrolling PS:
WARNING: this function is not allowed in a number of countries.
The «Dynamic RDS «allows the RDS to scroll so the information that is normally sent
by Radio Text (RT) will be sent in PS.
The scrolling PS allows 2 ways of working;
The "Char" mode:
- scrolling is character by character,
The "Word" mode:
- scrolling is done word by word automatically for words over 8 characters long. To
use this mode text must be preformatted with at least 8 characters.
Text information to be sent in Scrolling PS is delivered to the processor via the data
port with the UECP (SPB490) protocol.
94
Содержание Digital Encoder Plus
