IDS LCD Digital Keypad, Руководство пользователя, Страница: 26 / 32

26
IDS LCD Keypad User Manual 700-292-01C Issued March 2009
3. Press the [NUMBER] corresponding to the zone you wish to be programmed as a Buzz zone
followed by the [ * ] key. Alternatively use the [PANIC] or [MED] keys to scroll through the zones.
4. A [Y] next to the zone number indicates that the zone has been programmed as a Buzz zone.
Flashing text indicates a Stay zone. A zone cannot be both a Buzz and Stay Zone and a Stay
zone cannot be selected as a Buzz zone.
5. Repeat step 3 until all the required buzz zones are programmed.
6. Press the [#] key to exit the buzz programming mode.
NOTE:
A zone cannot be both a Buzz and Stay Zone.
A Stay zone cannot be selected as a Buzz zone.
10.2 How to Cancel Buzz Zones
HOLD [4] + [ZONE NUMBER] + [*] + [#]
1. Select the required Stay Profile. (See 9.1)
2. Hold down the [4] key until the keypad buzzer sounds. The LCD Display will indicate that you are
in Buzz Mode.
3. Press the [NUMBER] corresponding to the Buzz zone you wish to cancel followed by the [ * ]
key. Alternatively use the [PANIC] or [MED] keys to scroll through the zones.
4. A [N] next to the zone number indicates that the zone has not been selected as a buzz zone.
5. Repeat step 3 until all the required buzz zones have been cancelled.
6. Press the [#] key to exit the buzz zone programming mode.
11. Chime Zones
The chime mode allows the user to monitor nominated zones while the system is disarmed. The keypad
buzzer will sound briefly when the nominated zone is violated - the siren will NOT sound and no alarm
condition will be reported.
Example:
If you wish to know each time someone enters or exits the front door of your office, program this zone as
a chime zone, the keypad will beep each time someone opens the front door.
11.1 How to Program Chime Zones
HOLD [2] + [ZONE NUMBER] + [*] + [#]
1. Hold down the [2] key until the keypad buzzer sounds.
2. The LCD display will indicate that you are in the chime mode.
3. To program a zone as a chime zone, press the key corresponding to that zone followed by the [ * ]
key. The zone indicator will come on. Alternatively use the [PANIC] or [MED] keys to scroll
through the zones.
4. A [Y] next to the zone number indicates that the zone has been selected as a chime zone.
5. Program any other zones you wish to select as chime zones as per step 3.
6. Press the [#] key to exit the chime programming mode.