IDS LCD Digital Keypad, Руководство пользователя, Страница: 20 / 32

20
IDS LCD Keypad User Manual 700-292-01C Issued March 2009
disarmed, entering a global code at the keypad of the armed partition will disarm that partition and
entering a global code at the keypad of the disarmed partition will arm that partition.
8.3.5.5 Group Arm
(Not applicable to the IDS 816)
This code when entered will arm the partitions assigned to the user depending on their status. If all
partitions are disarmed, entering a group code will arm all of the assigned partitions. In a case where
some partitions are armed and others disarmed, entering this group code at the keypad of the disarmed
partition will arm the disarmed partitions only.
8.3.5.6 Group Disarm
(Not applicable to the IDS 816)
This code when entered will disarm the partitions assigned to the user depending on their status. If all
partitions are armed, entering a group code will disarm all of the assigned partitions. In a case where
some partitions are disarmed and others armed, entering this group code at the keypad of the armed
partition will disarm the armed partitions only.
8.3.5.7 Report User Open Close
(Not applicable to the IDS 816)
This option enables reporting of a pre-programmed reporting code when a partition assigned to this user
is armed / disarmed.
8.3.5.8 User Phone in Access
(Not applicable to the IDS 816)
If enabled this option allows the user to arm or disarm a panel using a DTMF telephone.
If the installer selects the full menu, the user will be able to bypass zones, open doors and toggle
outputs.
8.3.5.9 Report User Access
(Not applicable to the IDS 1224 & IDS 816)
This option enables reporting of a pre-programmed reporting code when a user opens a door assigned
to them.
8.3.5.10 Enable Anti-pass back for User
(Not applicable to the IDS 1224 & IDS 816)
If enabled this option does not allow a user to enter an assigned area for a second time, if the user has
not exited the assigned area after the previous entry.