IDS 1632 Installer Manual 700-256-02K Issued September 2009
18
To read the data stored in multi-digit locations (e.g. a telephone number, account codes etc.),
enter the location. Upon initial entry into the location, the first digit will be displayed by the zone
indicators. Pressing the
[Panic]
key will cause the next digit within the location to be displayed.
Where a hexadecimal number must be programmed, use the
[MODE]
key as per Table 2 below:
Table 2 : Hexadecimal Value
Hex Value Decimal Value
Key Strokes
A
10
[MODE]
key then
[0]
key
B
11
[MODE]
key then
[1]
key
C
12
[MODE]
key then
[2]
key
D
13
[MODE]
key then
[3]
key
E
14
[MODE]
key then
[4]
key
F
15
[MODE]
key then
[5]
key
7.1 Entering Program Mode
1.
Ensure that all partitions are unarmed.
2.
Press the
[#]
hash key followed by the
[INSTALLER CODE].
3.
The default installer code is 9999 or alternatively 999999 should a six digit default installer code
have been used.
4.
Press the
[*]
star key and a long beep will confirm entry into program mode. If a correct code
has been entered, the green READY indicator will flash.
7.2 Programming Standard Locations
1.
Ensure the panel is in program mode - the READY indicator will be flashing.
2.
Enter the
[LOCATION NUMBER
] of the program location you wish to view or change.
3.
Press the
[*]
star key. The READY indicator will continue flashing and the AWAY indicator will
come on.
4.
The zone LED’s will display the data stored in the program location in binary format.
5.
Enter the [NEW DATA] followed by the
[*]
star key. A long beep will indicate a valid entry and the
AWAY indicator will turn off.
6.
If you do not wish to change the data press the
[#]
key. The READY indicator will continue
flashing and the AWAY indicator will turn off.
7.
Repeat steps 2 - 6 until all the necessary locations have been programmed.
8.
Press the
[#]
hash key to exit program mode.
9.
The READY indicator will stop flashing and the panel will return to the standby mode.
7.3 Programming Extended Locations
1.
Ensure that the panel is in program mode - the READY indicator will be flashing.
2.
Enter the
[LOCATION NUMBER]
of the program location that you wish to view or change.
3.
Press the
[*]
star key. The READY indicator will continue flashing and the ARMED indicator will
come on.
4.
Enter the
[SUB-LOCATION NUMBER]
for the program location that you wish to view or change.
5.
Press the
[*]
star key, a long beep indicates a valid data entry. The READY indicator will continue
flashing and the ARMED and AWAY indicators will come on.
6.
Enter the
[NEW DATA]
followed by the
[*]
star key. A long beep will indicate a valid entry. The
AWAY indicator will turn off.
Содержание 1632
