Electronic Pushbutton Locks
EL730SLR
© 2017 IDN, Inc. All rights reserved.
0817
51
Federal Communications Commission Statement
This device complies with Part 15 of the FCC. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user isencouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
DECLARATIONS AND SAFETY STATEMENTS
IC Regulations
This Class B digital apparatus complies with Canadian ICES-003 .
Cet appareil num
é
rique de la classe B est conforme
à
la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS-210 standard. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation of the device.
INFORMATION PAGE
Programming code
Name
User code
Name
User code
52
1. Do not share the programming code with anyone else.
2.Keep a written copy of all vaild user codes in a safe place.
( You may use the table below to record your information)
3. The memory capacity for user codes is 10 sets.
4. It is STRONGLY recommended changing all codes if any security information in the table is lost.
SECURITY INSTRUCTION
