Electronic Pushbutton Locks
EL730SLR
© 2017 IDN, Inc. All rights reserved.
0817
A
A
A
A
A
A
A
A
SET
DEL
1
2
3
4
5
6
7
8
9
0
C
37
HOW TO DISABLE BUTTON SOUND (MUTE MODE)
SETUP MODE
Steps are as follows:
1. Press and hold [SET] button for over 2 seconds.
The Red LED will light up and beep twice. You are now under setup mode.
2. Enter 123456 (or current programming code) and then press button .
Enter [60] and press button .
3. Enter [0] and press button .
The Red LED will light up for 10 seconds. The lockset will turn on mute mode.
4. Enter [1] and press button .
The Red LED will light up for 10 seconds. The lockset will turn off mute mode.
(default mute mode is off)
Note:
1.The lockset will go back to the standby status if no
button is pressed in 10 seconds after accessing setup
mode.
38
A
A
A
A
A
A
A
A
SET
DEL
1
2
3
4
5
6
7
8
9
0
C
SETUP MODE
HOW TO ENABLE AUTO-LOCK MODE
Steps are as follows:
1. Press and hold [SET] button for over 2 seconds.
The Red LED will light up and beep twice. You are now under setup mode.
2. Enter 123456 (or current programming code) and then press button .
Enter [80] and press button .
3. Enter [0] and press button .
The Red LED will light up for 10 seconds. The lockset will turn on auto-lock mode.
4. Enter [1] and press button .
The Red LED will light up for 10 seconds.
The lockset will turn off auto-lock mode. (default auto-lock mode is off)
Note:
1.The lockset will go back to the standby status if no button is
pressed in 10 seconds after accessing setup mode.
2.The lockset will auto-lock in 10 seconds (default value) without
flashing and beeping after unlocking if you turn on auto-lock mode.
3.The lockset can still be locked by pressing button manually even
if you turn on auto-lock mode.
