IDK MSD-5401 Скачать руководство пользователя страница 193

Страница: 193 / 271

193

8.13.6 Startup settings [STARTUP]

･

Cross point memories: CROSS POINT1 to 9

Starts up with the channel settings saved in the selected cross point memory. For settings other

than channel settings, starts up with the settings of the last MSD power off.

･

CHANNEL OFF

Channel setting will be OFF. For settings other than channel setting, starts up with the settings of

the last MSD power off.

･

LAST CHANNEL [Default]

Starts up with the settings of the last MSD power off.

･

Preset memory: PRESET MEMORY 1 to 8

Starts up with the settings saved in the preset memory. For settings that are not saved in the

preset memory, it starts up with the settings of the last MSD power off. (For settings that can be

saved in the preset memory, see

“

8.13.5 Saving all settings

”.)

1. To set the startup setting using menu:

MSD-5404

Top

↓

SET key

[FUNCTION SELECT]
PRESET MEMORY

▲▼

keys: Select “PRESET MEMORY”.

↓

SET key

[PRESET MEMORY]
STARTUP

▲▼

keys: Select “STARTUP”.

↓

SET key

[STARTUP]

AST CHANNEL

▲▼

keys: Select the setting for startup (CROSS POINT 1 to 9,

CHANNEL OFF, LAST CHANNEL, PRESET MEMORY 1 to 8).

↓

ESC key: Returns to the previous screen.

* You cannot select a preset memory whose settings are not saved. Nothing is saved in all preset memories

by factory default.

2. To set the startup setting using commands:

@SMU: Set startup status

@GMU: Get startup status

Содержание MSD-5401
















































































































































































































































































Результаты поиска

Содержание MSD-5401

Отзывы:

Похожие инструкции для MSD-5401

Бренды по названию

Популярные бренды

IDK MSD-5401, Руководство пользователя

Результаты поиска

Содержание MSD-5401

Отзывы:

Похожие инструкции для MSD-5401

Бренды по названию

Популярные бренды