IDK MSD-54 Series Скачать руководство пользователя

Страница: 30 / 271

MSD-54 SERIES User

’s Guide

Number

Item

Description

SWITCHING

MODE

Sets and displays channel switching mode.

Does not affect switching

mode of the front panel and parallel input.

V&A (switching video & audio simultaneously), VIDEO (switching only

video), AUDIO (switching only audio)

Input channel

selection (IN1 to

IN9, OFF )

Selects video and audio output.

Orange: Video & Audio; Green: only video; Red: only audio

DISPLAY POWER

Turns on/off connected display devices. No command is registered by

factory default. To control

display’s power, register the command to this

switch in

“

8.12.3 Command link

”.

Cross point

Loads registered cross point.

Audio output level

Displays the current audio output level.

Audio output level:

UP, DOWN

Turns up/down the volume 1 [dB] per click.

Audio output level:

MUTE

Turns on and off the mute function.

Red: MUTE ON; Black: MUTE OFF

COMMAND

EXECUTE

Executes control commands assigned to COMMAND A to I. No command

is registered by factory as default. To execute control commands, register

them to COMMAND A to I in advance by following instructions in section
“

8.12.3 Command link

”.

Buttons in which control command is registered are displayed in green.

However, as each command (A to I) has two planes (PLANE A and B), two

commands are executed alternately if two different commands are

registered to plane A and B. If PLANE B is executed, the button is

displayed in green (PLANE A will be executed at the next click); if PLANE

A is executed, the button displayed in orange (PLANE B will be executed at

the next click).

NAME EDIT

Edits names of

“CROSS POINT”, “AUDIO VOLUME,” and ”COMMAND

EXECUTE”. Click this button, to open the window of

[Figure 7.7]

RELOAD

Acquires the latest information of the MSD. (It can also be updated

automatically by setting

“AUTO RELOAD TIMER”, 11, below.)

AUTO RELOAD

TIMER

Sets time interval to receive the latest information periodically and to

refresh WEB browser window. You can set the interval from 10 to 65535

seconds by 1 second. If you do not use this function, set the interval to 0

second (default).

Содержание MSD-54 Series
















































































































































































































































































Результаты поиска

Содержание MSD-54 Series

Отзывы:

Похожие инструкции для MSD-54 Series

Бренды по названию

Популярные бренды

IDK MSD-54 Series, Руководство пользователя

Результаты поиска

Содержание MSD-54 Series

Отзывы:

Похожие инструкции для MSD-54 Series

Бренды по названию

Популярные бренды