IDK MSD-54 Series Скачать руководство пользователя

Страница: 170 / 271

MSD-54 SERIES User

’s Guide

170

[Step III. When setting

“PORT” to CEC]

PORT:CEC
DELAY:

s000ms

▲▼

keys: Set the delay time in seconds (0 to 999).

↓

◄►keys

PORT:CEC
DELAY: 0s00

▲▼

keys: Set the delay time in seconds in milliseconds (0 to 999).

↓

◄►keys

OUT1 CEC:

▲▼

keys: Select the control of OUT1 (-, POWER OFF, POWER ON).

↓

◄►keys

OUT2 CEC:

▲▼

keys: Select the control of OUT2 (-, POWER OFF, POWER ON).

↓

◄►keys

OUT3 CEC:

▲▼

keys: Select the control of OUT3 (-, POWER OFF, POWER ON).

↓

◄►keys

OUT4 CEC:

▲▼

keys: Select the control of OUT4 (-, POWER OFF, POWER ON).

↓

◄►keys

ERROR:

TOP

▲▼

keys: Select the action for when retry over occurs (STOP, EXEC).

↓

◄►keys

MEMO:
1:

▲▼

keys: Set the “MEMO” (20 to 7D of “

9 ASCII codes

” except for 2C).

◄►keys: Moves the cursor to the next character (Up to 14 characters).

↓

SET key: Applies settings.

[PRESET COMMAND 1]
NOW UPDATE...

The message is displayed for one second and then previous screen is

displayed automatically.

↓

[COMMAND EDIT]
CMD

Note:

If you do not press the “SET” key, the control command is not changed. Make sure to press the “SET” key.

CEC can only control the power of display devices connected to the HDMI output connectors. Devices

connected to HDMI input connectors (IN1 to 5) cannot be controlled, and only power control is available.

This function may not work correctly in old devices and some devices supporting CEC.

2. To edit the control command using commands:

@SEC: Set control command (Control communication command)

@GEC: Get control command (Control communication command)

@SEC: Set control command (Display received data)

@GEC: Get control command (Display received data)

@SEC: Set control command (Control Tally output)

@GEC: Get control command (Control Tally output)

@SEC: Set control command (Control CEC)

@GEC: Get control command (Control CEC)

Содержание MSD-54 Series
















































































































































































































































































Результаты поиска

Содержание MSD-54 Series

Отзывы:

Похожие инструкции для MSD-54 Series

Бренды по названию

Популярные бренды

IDK MSD-54 Series, Руководство пользователя

Результаты поиска

Содержание MSD-54 Series

Отзывы:

Похожие инструкции для MSD-54 Series

Бренды по названию

Популярные бренды