IDK MSD-54 Series Скачать руководство пользователя

Страница: 144 / 271

MSD-54 SERIES User

’s Guide

144

8.9.7 EDID Copy [MONITOR EDID COPY]

You can load the EDID of display devices and save it in the MSD.
To use the copied EDID, select “COPY DATA” for ”

8.9.1

EDID setting

“. After that, the copied data can be

used as the same as that of the built-in data.

The copied EDID can only be used for digital input (IN1 to IN5), and not for analog inputs (IN6 to IN9).

1. To copy the EDID using menu:

MSD-5404

Top

↓

SET key

[FUNCTION SELECT]
EDID

▲▼

keys: Select “EDID”.

↓

SET key

[EDID]
MONITOR EDID COPY

▲▼

keys: Select “MONITOR EDID COPY”.

↓

SET key

↑

ESC key: Cancels the setting and returns to the previous screen.

[MONITOR EDID COPY]

OUT

NO.1 COPY DATA1

▲▼

keys: Select the desired output connector (OUT1 to OUT4).

↓

◄►keys

[MONITOR EDID COPY]
OUT1 NO.

COPY DATA1

▲▼

keys: Select the desired EDID number (1 to 8).

↓

◄►keys

[MONITOR EDID COPY]
OUT1 NO.1

OPY DATA1

▲▼

keys: Set the EDID name (20 to 7D of

“

9 ASCII codes

”).

Up to 10 characters can be registered. The cursor moves to the next

aracter using ◄►keys.

↓

SET key: Displays the confirmation screen

↑

ESC key

[MONITOR EDID COPY]
SAVE? =

▲▼

keys: Select “YES” or “NO”.

↓

To save the settings: Select “YES” and press the “SET” key.
To return to the menu without saving: Select “NO” and press the “SET” key.

[MONITOR EDID COPY]
EDID COPY COMPLETE

The message is displayed for one second and then previous screen is

displayed automatically.

↓

[EDID]
MONITOR EDID COPY

If no display device is connected to the selected output, the message is displayed,
and you cannot press the “SET” key.

2. To copy the EDID using command:

@RME: Copy EDID

[MONITOR EDID COPY]
OUT

UNCONNECTED

Содержание MSD-54 Series
















































































































































































































































































Результаты поиска

Содержание MSD-54 Series

Отзывы:

Похожие инструкции для MSD-54 Series

Бренды по названию

Популярные бренды

IDK MSD-54 Series, Руководство пользователя

Результаты поиска

Содержание MSD-54 Series

Отзывы:

Похожие инструкции для MSD-54 Series

Бренды по названию

Популярные бренды