HDC-TH200 User Guide/Command Guide
77
10
Specification
10.1 Product specification
Item
Description
Input
Video
HDMI/DVI
1 input
HDMI Deep Color (*1)/DVI 1.0
TMDS single link, HDCP 1.4 (*2)
TDMS clock: 25 MHz to 225 MHz
Built-in cable EQ, EDID emulation, CEC (Pass-through)
Connector: Female HDMI Type A (19-pin)
Analog
1 input
Composite video/Y/C/Analog RGB/Analog YPbPr (Auto-recognition)
Composite video : 1.0 V[p-
p]/75 Ω
Y/C
: 1.0 V[p-p] (Y)/0.286 V[p-
p] (C)/75 Ω
Analog RGB
: 0.7 V[p-
p]/75 Ω, HS/VS TTL level
Analog YPbPr
: 1.0 V[p-p] (Y)/0.7 V[p-p] (Pb/
Pr)/75 Ω
EDID emulation
Connector: Female high-density D-sub (15-pin)
Format
Analog
: NTSC/PAL
Analog/HDMI : VGA to QWXGA (Dot clock: 25 MHz to 165 MHz)
For WUXGA/QWXGA, only Reduced Blanking is supported.
480i / 480p / 576i / 576p / 720p / 1080i / 1080p
Audio
Digital
1 input
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. input level: 0 dBFS
Connector: Female HDMI Type A (19-pin)
Analog
1 input
Unbalanced Stereo LR
Input
impedance: 24 kΩ, Reference level: -10 dBu, Max. input level: +10 dBu
Connector: Stereo mini jack (3.5 mm)
Output
Video
HDBaseT
1 output
HDBaseT
RS-232C, LAN, CEC (Pass-through)
Connector: RJ-45 (*3)
Cable: CAT.5E HDC, Cat5e UTP/STP, Cat6 UTP/STP (*4)
Audio
Digital
1 output
Multi-channel LPCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Reference level: -20 dBFS, Max. output level: 0 dBFS
Connector: RJ-45
Maximum
transmission
distances
Digital input
98 ft. (30 m) (*5)
Digital output
328 ft. (100 m), 492 ft. (150 m) (Long reach mode is used) (*6)
Function
Analog video
processing
3D Y/C separation
Others
Input channel automatic switching, Last memory, Anti-snow (*7), Connection Reset (*8),
Button security lockout
Control
LAN
1 port/RJ-45 10Base-T/100Base-TX (Auto Negotiation), Auto MDI/MDI-X
General
AC adapter
Input : 100 - 240 VAC ± 10%, 50 Hz/60 Hz ± 3 Hz
Output : DC 12 V 3 A (A dedicated AC adapter is provided)
Power consumption
About 11 Watts
Dimensions
8.3 (W) × 1.1 (H) × 5.9
(D)” (210 (W) × 27.5 (H) × 150 (D) mm)
(Half rack wide, thin type) (Excluding connectors and the like)
Weight
2 lbs. (0.9 kg)
Temperature
Operating : 32°F to 104°F (0°C to +40°C)
Storage : -4°F to +176°F (-20°C to +80°C)
Humidity
Operating/Storage: 20% to 90% (Non Condensing)
*1
30 bit/pixel (10 bit/component) and 36 bit/pixel (12 bit/component) Deep Color are supported while x.v.Color, 3D, ARC and HEC are not supported.
*2
HDCP-compliant DVI signals are not supported. To transmit these signals, use our extender which supports DVI signals or MSD-402.
*3
RJ-45 (HDBaseT output connector) is only for extending digital video and audio signals over a Cat5e/Cat6 cable. Do not use for LAN devices.
*4
T568A or T568B straight. The CAT.5E HDC cable is developed by IDK and recommended by HDBaseT alliance.
*5
The maximum cable distance varies depending on the connected devices and was measured under following conditions:
・
1080p@60: When IDK
’s 24 AWG cable was used and signals of 1080p@60 24 bit/pixel (8 bit/component) was input or output.
The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer
’s
cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
*6
The maximum transmission
distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling method,
or
other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above. Operations may not be stable with some LCD
devices; please check the operation beforehand or contact us.
The maximum transmission
distance is the shorter distance of connected HDBaseT product or sink device’s maximum transmission distance.
Up to 492 ft. (150 m): 1080p (24 bit) in Long reach mode. For Long reach mode, use IDK’s HDBaseT Products that supports 328 ft. (100 m) or longer.
*7
The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
*8
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the
Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the HDC
’s output. If other devices are connected between the HDC’s output and sink device, this feature
may be invalid.
