HDC-TH200 User Guide/Command Guide
47
For video timing to be adjusted, see
[Table 8.9] Video timings which are adjusted by automatic
”.
Even if video timing is adjusted automatically, the timing setting saved in the HDC is not changed.
[Table 8.9] Video timings which are adjusted by automatic adjustment mode
Settings adjusted by automatic measurement
mode 1
Settings adjusted by automatic measurement
mode 2
8.5.4 [ F43 ] Starting position of horizontal dots
8.5.5 [ F44 ] Horizontal Active area
8.5.9 [ F48 ] Starting position of vertical lines
8.5.10 [ F49 ] Vertical active area
8.5.4 [ F43 ] Starting position of horizontal dots
8.5.5 [ F44 ] Horizontal Active area
8.5.7 [ F46 ] Display period of horizontal dots
8.5.9 [ F48 ] Starting position of vertical lines
8.5.10 [ F49 ] Vertical active area
8.5.12 [ F51 ] Display period of vertical lines
Notes:
・
Depending on contents such as movie, sometimes display position will be moved because of automatic
measurement. In this case, please set automatic adjustment to “oFF”.
・
This function is enabled for 25% or more brightness video and if the video content is input in almost fully in
the display area.
・
If you change setting from [F42] to [F53] manually, the manual settings will have priority and automatic
adjustment is going to be “oFF”.
