HDC-TH200 User Guide/Command Guide
30
8.2 Input switching setting
8.2.1 [ F05 ] Priority of input channel automatic switching
Setting value
00 : Auto [Default]
01 : Digital input has priority
02 : Analog input has priority
03 : Fixed digital input
04 : Fixed analog input
05 : Disabling
■
Auto
HDC-TH200 will switch input channel under following conditions:
・
When new video signal is detected, HDC-TH200 switch the input channel to the detected channel
・
When current selected channel loose signal and if another channel has video signal, HDC-TH200 switch
the input channel to the channel which has video image.
Selected channel is memorized (last memory). When turn off the HDC having active input signals on Digital
input and analog input, HDC will select the channel which is selected before turn off.
■
Digital input has priority
If HDC-TH200 detects both digital and analog video signal, it output digital output.
Only when there is no digital input but analog input, the HDC output analog video signal.
■
Analog input has priority
If HDC-TH200 detects both digital and analog video signal, it output analog output.
Only when there is no analog input but digital input, the HDC output digital video signal.
■
Fixed digital input
Always output digital video signal
■
Fixed analog input
Always output analog video signal
■
Disabling
Disables the automatic switching feature.
This value is for switching input channel remotely using communication command.
You can set masking time for automatic switching from
8.8.9 [ C30 ] Ignoring duration after automatic
”.
【
See: 8.8.9 [ C30 ] Ignoring duration after automatic switching
