HDC-RH401/201/101 Users Guide
35
8.8 [ F20 ] Setting Deep Color
You can set the Deep Color (color depth) that is output from the source device.
08: 24bit/pixel (8bit/component) [Default]
10: 30bit/pixel (10bit/component)
12: 36bit/pixel (12bit/component)
Notes:
● If you select “30bit/pixel (10bit/component)” or “36bit/pixel (12bit/component)”, the transmission clock will
be faster resulting in noise on video when a poor-quality cable or long cable is connected. In this case,
change the setting to “24bit/pixel (8bit/component)”.
● This is enabled only if one of 03 to 22 is selected for the EDID resolution.
・
Setting by menu
Normal condition (OFF)
↓ SET key
“
－
” “
＋
” key set INPUT Deep Color
→ select F20
↓ SET key
“
－
” “
＋
” key set Deep Color [Default: 08: 8bit/component (24bit/pixel )]
08:
8bit/component ( 24bit/pixel )
10:
10bit/component ( 30bit/pixel )
12:
12bit/component ( 36bit/pixel )
↓
During Deep Color setting is processing, READY LED is OFF. After setting is finished, the LED
is ON.
↓
After processing, 7-SEGMENT LED goes back to menu.
