Part 2 - Configuration
64
FTP
The FTP feature uploads event-detected images or video
clips to the FTP site when an event occurs. Click the +
icon at the bottom of the list to add an FTP site.
●
FTP
: Enter the FTP site information using the virtual
keyboard.
●
Uploade File
: Select the file format to be uploaded to
the FTP site.
•
In order to add an FTP site, NetFS setting must
be configured.
•
Up to 5 FTP sites can be registered.
Click the + icon at the bottom of the list to add an FTP
site.
●
Site
: Displays the list of the registered FTP sites.
Select an FTP site from the list. If the Use settings of
the NetFS site are set to anything other than
ALL
or
Clip-Copy
, you cannot select the FTP site. You can
change the Use settings or register other FTP sites in
the NetFS setup screen in the Network menu.
●
Uploade File
: Select between
CBF
and
MP4
. When
you select
CBF
, the NVR will upload an event detected
video clip to the FTP site. When you select
MP4
, the
NVR will attach an event-detected image file to the
FTP site.
●
Site Information
: Displays information for the FTP
site.
•
For the FTP notification to work properly, the related
settings should be configured as follows:
-
Network menu - NetFS tab - Use setting
- Event menu - Actions - EventUpload setting
•
When you delete an FTP site from the NetFS setup
screen in the Network menu, the FTP site in the
FTP setup screen in the Notification menu will be
deleted, too.
•
If many event occurs during a short period, the
images may not be uploaded to the FTP site.
•
The FTP notification is not supported for system
events.
•
If upload fails several times, the images or video
clips are deleted.
•
When the NVR boots, all images and video clips are
deleted even if they were not uploaded yet.
