Part 1 - Getting Started
19
Apply/Cancel Buttons
While in Camera Registration mode, select
Apply
to register all changes. When selecting
Apply
, the
following message will be displayed. You can activate or
deactivate Self-diagnosis.
Select
Cancel
to exit Camera Registration mode without
applying the changes.
It is not possible to register a camera that has already
been registered to a different NVR.
Diagnosis Process
When the camera is registered to the NVR,
Self-
diagnosis
runs automatically for the new registered and
changed cameras.
If
Self-diagnosis
is processing,
Diagnosis Processing
message will be displayed.
If
Self-diagnosis
is failed,
Diagnosis Requirement
message will be displayed. In this case, you can run
Self-
diagnosis
manually. For more information, refer to the
