Part 2 - Configuration
91
–
Detection Reference Time (sec.) :
Set the time to
detect objects in the queue management zone. It
detects when the objects (people) stay longer than
the time frame set in the defined area.
Detection Reference Time (sec.) is only supported
if the
Analytic Type
is set to Queue Management.
2
DV-2232
People Counting
Count the number of people passing through the line
on the live screen.
Right-click on the zone setup screen to bring up the
People Counting Menu.
–
Main :
Add the total number of people by
sending them to the desired channel. The channel
designated as the main can use the Exceed
Occupancy Limit event.
–
Boundary:
Set a virtual border to count the floating
population.
Depending on the location of the boundary,
the number of people may be incorrectly
calculated.
–
Save:
Save the changes and exit the menu.
–
Cancel :
Exit the setup screen without saving the
changes.
●
Configuration
: Set the environment of people
counting. Select People Counting as the video
analysis type, and then select Settings. Below is an
example of a screen in which the video analysis type
is set to people counting.
●
Dynamic Background Suppression :
Recognize the
objects (people) even if the background is moving.
●
Threshold :
Set the reference value that can be
recognized as a person in the image.
●
Counting position setting:
Set the position of the
reference point of a person to count the number of
people passing through the boundary.
