Part 2 - Configuration
57
video profile value (main stream) set in the schedule
and record with the profile 4 value (sub stream) at the
same time.
•
It displays as below when recording on a network
video recorder.
– If the screen layout is less then 3x3, video
profile (main stream) is displayed and if it
is larger than 3x3, profile 4 (sub stream) is
displayed.
– If the channel is larger than 3x3 size on the
screen layout such as 1+7 and 1+12, the
video profile (main stream) is displayed first
but otherwise the profile 4 (sub stream) is
displayed first .
•
This function is supported only for cameras
supprting dual recording function.
Stream II
Configure the camera’s failover profile, intelligent codec
and MAT settings.
●
Failover Profile
: Select a video profile for the smart
failover recording.
●
Intelligent Codec
: Lower bitrate by using the
intelligent codec.
•
Some camera models may not support the
Intelligent Codec function.
•
When using intelligent codec function, the
start of some functions, such as clip copy or clip
attachment can be changed to an earlier point
than the selected point.
●
MAT Setup
: Select the MAP Setup option to use the
MAT (Motion Adaptive Transmission) function during
video transmission and recording.
• When the MAT (Motion Adaptive Transmission)
function is active, the associated VA device may
not work properly.
• It is recommended that you do not use the MAT
function of the associated camera to increase the
accuracy of the image analysis.
• Some camera models may not support the MAT
function.
* MAT function(Motion Adaptive Transmission)
reduces bandwidth overload and saves storage
capacity by reducing the frame rate of the video
during periods of inactivity. The user can select the
period of sustained inactivity which triggers this
function by adjusting Inactivity Period.
