Part 2 - Configuration
50
1
Preset
Use the buttons below to choose a preset position.
– Directional Buttons
(
):
Used to tilt and pan the camera.
–
Zoom
(
): Zoom in and out.
–
Focus
(
): Adjust camera focus to far or near.
–
Speed
: Specify the camera’s panning and tilting
speed.
●
Set
: Choose a preset number and then enter a name.
This saves the current preset under the specified
preset number and name.
●
Go to
: Select a preset from the list and then click Go
to to move the camera to the selected preset position.
●
Edit
: Used to change the selected preset’s name.
●
Remove
: Used to remove the selected preset.
2
Scan
Used to set up a profile for moving the camera between
two points. At least two presets must be available in
order to use the scan feature.
●
Set
: Used to set up a scan profile.
–
Name
: Enter a name for the scan profile.
–
Start/Stop
: Specify which presets to use as start
and stop points.
–
Dwell Time (sec.)
: Specify how long the camera will
dwell at start and stop positions.
–
Speed/Direction
: Specify scanning speed and
direction.
●
Test
: Select a scan profile and then click Test to test it.
●
Edit
: Used to edit the selected scan profile.
●
Remove
: Used to remove the selected scan profile.
3
Pattern
Used to set up a pattern profile for the camera to follow
along.
