Part 2 - Configuration
57
Camera System_Recording Fail
●
Activation Time
: Specify how long recording fail has
to last in order for it to be considered as an event.
When the recording fail is not detected for the
●
an event.
●
Actions
: Specify which actions to take when a
Recording Fail event occurs.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to
Event
or
Time & Event
mode, the selected
cameras will begin linked recording when an event
occurs.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, Push, and/or Alert Window.
–
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
In order to use the Callback feature, the NVR must
be registered on the remote program.
Video-Analytics
Event lists that occur through video analysis include
Motion, Tampering, PIR, TripZone, Face Detection and
Auto Tracking events..
Video-Analytics_Motion
●
No.
: Select which cameras to apply Motion Detection
to.
●
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
●
Zone
: Define the motion detection block.
