Idis DC-SP6C11EXY, Инструкция по эксплуатации

Страница: 9 / 30

VII
Ex structure instruction

We have made adequate consideration in flameproof enclosure design of the
explosion-proof camera to prevent explosive gases getting into the inner
volume, the explosion inside the enclosure cannot cause the explosion of the
external explosive gases. We ensure the explosion-proof performance by
strengthen enclosure the strength, adjust the length and gap of the joint of
associate components and limit the maximum surface temperature.

The enclosure is able to subject to static pressure test (1.5 times for at least
10s) specified in EN60079-1/IEC60079-1, no leakage or deformation allowed
after test.

The maximum surface temperature will no more than 80ºC in normal operation.

Tempering glass is adopted in observation port, the tempering glass shall pass
the impact and thermal shock test.

Ingress protection level:IP66,IP68(2m/2h).

Protection the flameproof surface in maintaining of this product, otherwise the
damaged flameproof surface will affect the Explosion-proof performance.

When the product needs anti-corrosion treatment (especially carbon steel), the
surface of the product will be sprayed. In this case, please wipe the
non-metallic layer with a damp cotton cloth during maintenance. Pay attention
to the protective coating. Do not use liquids with strong corrosion.
flameproof joint
DC-SP6C11EXY Explosion-proof Fisheye camera
·
Instruction Manual