Idis DC-SP6C11EXY, Инструкция по эксплуатации

Страница: 6 / 30

DC-SP6C11EXY Explosion-proof Fisheye camera
·
Instruction Manual
IV
3. Power supply requirements

Local electrical safety standard shall be followed in installation and service of
this product.

Convenient de-energizing device shall be adopted for emergency cutting off.

Check if the power supply is suitable for operation before start.

Protect the power cable from trample or compressing, especially for the plug,
socket and joint out from devices.
4. Service condition requirements

Please do not focus the camera to hard light (such as lamp or sunlight), which
will cause too bright of the image, it’s not malfunction but it does will affect the
duration of the CCD (or CMOS).

Transport, operate and store this product in applicable temperature and
humidity range. Do not locate it in wet, overheated (over +60ºC), extreme cold
(less than -40ºC) environment or area with strong electromagnetic radiation or
unstable lighting conditions.

The product shall be protected from any entry of water or other conductive fluid,
which may damage the internal electrical element.

Avoid overheated, the product shall be well ventilated.

Avoid damage caused by compressing or violent vibration in transmission,
storage or operation.

The product shall be well packaged as new product or equivalent in
transmission.

We suggest using this product with Lightning Protection Devices.

Internal and external grounding shall be reliable and the cross-sectional area
shall be no less than 4mm
2
.