Idis DC-B1001, Руководство по эксплуатации

Страница: 41 / 58

Part 3 - Remote Setup
41
Trip-Zone
Select Trip-Zone to configure trip zone event settings.
With trip zone event enabled, motion detected inside/
outside the selected area will be assumed as an event.
DC-B1001 / DC-B1101
DC-B1103 / DC-B1203
• Sensitivity : Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
• Trip-Zone : Click Setup and define the trip zone
using blocks.
- (Select)/ (Unselect) : Enable/disable trip
zone.
- (Single Block) : Select/unselect trip zone
blocks individually.
- (Zone) : Select/unselect multiple trip zone
blocks.
- (All) : Select/unselect all trip zone blocks.
- Trip Direction : Define in which direction
the motion has to occur in order for it to be
considered as an event. Select
In for movement
occurring from outside the trip zone in and Out
for movement occurring from inside the trip zone
out.
• Motion Ignoring Interval : With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
• Daytime : Specify when daytime starts and ends. All
other times will be assumed as nighttime.
• Event Action : Select a trip zone event alert action.
- Alarm Out : Select if you wish to generate an
alarm out. DC-B1103 / DC-B1203 only
-
Send Email
: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback : Select this option to send
a message to a remote system and then select
which system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
- Audio Alarm : Select this option to generate an
audio alert and then choose an audio file (.wav).
DC-B1103 / DC-B1203 only
- FTP Upload : Select this option if you wish to
upload images to the FTP server.
- Record : Select this option to record video. DC-
B1103 / DC-B1203 only
-
Move PTZ to
: Select a preset position to move
the pan/tilt driver to that position. Preset positions
can be set from the remote program.
DC-B1103 /
DC-B1203 only
Event Action settings must be configured
correctly in order to perform event actions.