Idis DC-B1001, Руководство по эксплуатации, Страница: 30 / 58

Part 3 - Remote Setup
30
Miscellaneous
Configure Miscellaneous settings.
• Video Output : Select a video output signal format.
Streaming
•
Primary, Secondary, Tertiary
: Multistreaming is
supported. (priority: Primary > Secondary > Tertiary).
Enable/disable streaming use. The lower stream
settings may change depending on higher stream
settings. The
tertiary stream may not be available
depending on higher stream settings (refer to the
table below).
Model
Primary Secondary Tertiary
Resolution ips Resolution ips Resolution ips
DC-B1001 704x480 30 704x480 15 - -
DC-B1103 /
DC-B1101
1280x720 30 1280x720 15 - -
DC-B1203 1920x1080 30 704x480 30 - -
• Compression : Choose the streaming compression
method.
• Resolution : Choose a resolution setting for video
streaming. The current stream resolution cannot be
higher than the higher stream resolution.
• Quality : Choose a quality setting for video
streaming.
• Bitrate Control : Choose a bitrate control mode for
H.264 compression.
- CBR (Fixed Bitrate) : Maintains the current
bitrate regardless of motion change in the video.
- VBR (Variable Bitrate) : Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
• Frame Rate : Choose a frame rate setting for video
streaming. The fame rate of the current stream
cannot be higher than the fame rate of the higher
stream if those stream resolutions are same.
• Default Record Stream : Choose a stream to use
for recording. This setting, however, may not apply
if a recording stream has been designated from the
remote program or the SD card recording feature
has been enabled. For more information, refer to the
Settings on page 37.
SD card recording feature is supported in
DC-
B1103 / DC-B1203
models only.