Idis DC-B1001, Руководство по эксплуатации, Страница: 39 / 58

Part 3 - Remote Setup
39
Alarm In
DC-B1103 / DC-B1203 only
Select Alarm In to enable alarm in event. With alarm
in event enabled, alarm in detections by the alarm in
connector will be assumed as events.
• Title : Enter a name for the alarm in device.
• Type : Select the alarm in type.
•
Event Action
: Select an alarm in event alert action.
- Day & Night Mode : Select if you do not wish to
use the IR cut filter when an event is detected.
Select this option to override the
Day & Night
Mode settings under Video > Camera . Select
B&W Mode to enable black and white mode
when an event is detected. Expiration of the
detected event will disable B&W Mode and
restore IR Cut Filter.
- Alarm Out : Select if you wish to generate an
alarm out.
- Send Email : Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback : Select this option to send
a message to a remote system and then select
which system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
- Audio Alarm : Select this option to generate an
audio alert and then choose an audio file (.wav).
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
- Record : Select this option to record video.
- Move PTZ to : Select a preset position to move
the pan/tilt driver to that position. Preset positions
can be set from the remote program.
Event Action settings must be configured
correctly in order to perform event actions.
Motion Detection
Select Motion Detection to configure motion
detection event settings. With motion detection event
enabled, motion detections within the designated area
will be assumed as events.
DC-B1001 / DC-B1101