Installation, Support, and Maintenance Guide
15
iQ 200 Rackmount Satellite Router
Tools and Supplies Required for Installation
4.
Prepare the coax cables as directed in
connect to
RX IN
and
TX Out.
5.
Prepare the Ethernet cable(s) and connector(s) as described in
. For connection to the user interface, use
ETH1
port with an RJ-45
cable as described in
6.
If using the
Console
port for servicing, prepare the console port cable and connector as
7.
Mount the router as directed in
Mounting the iQ 200 Rackmount Satellite
8.
Connect the power as directed for either AC or DC power supplies:
•
See
Installing With an AC Power Supply (Option 1)
•
See
Installing With a 36-76 VDC Power Supply (Option 2)
9.
Monitor front and rear panels during startup. See
iQ 200 Rackmount Satellite Router Rear
10.
Prepare PC for iQ 200 Rackmount Satellite Router connection as specified in
Preparing the PC for Connection to the iQ 200 Rackmount Satellite Router
11.
Login PC to the user interface.
12.
Install the firmware and configure the satellite router as specified in
Configuring the iQ 200 Rackmount Satellite Router
.
13.
If the router needs repacking or maintenance see
14.
When the iQ 200 Rackmount Router is physically installed, the firmware and configuration
of the satellite router needs to be completed. Refer to the
Terminal WUI User Guide
for
the release of software installed on the system and for instructions.
4.2 Tools and Supplies Required for Installation
specifies recommended tools and supplies used when
installing the iQ 200 Rackmount Satellite Router.
4.3 Unpacking iDirect Equipment
The satellite router and related equipment may be shipped in one or more shipping
containers. Once all of the boxes have been received, perform the following tasks:
•
Confirm the boxes are facing upward (refer to the box orientation arrows on the shipping
container)
•
Inspect all shipping containers
•
If any damage or other signs of mishandling are evident, inform the carrier and either
iDirect or the reseller
•
Remove the tape and any exterior covering from the box lid
Save the iQ 200 Rackmount Satellite Router shipping boxes after unpacking the system. These
boxes will be needed in the event of moving or shipping the system in the future. See
Содержание iQ 200
