Idexx VETLAB UA, Руководство оператора

Страница: 36 / 38

36
IDEXX VetLab
UA Analyzer Operator’s Guide
Safety Information
The IDEXX VetLab UA Analyzer was designed and manufactured to comply with the following
international regulations, “Safety requirements for electrical equipment for measurement, control
and laboratory use,” and left the factory in a safe condition. To keep the analyzer in a safe
condition, you must observe all instructions and warnings included in this manual.
This product fulfills the requirements of Directives 2006/95/EC for low voltage and 2004/108/EC for
electromagnetic compatibility.
Approved by Underwriters Laboratories, Inc. (UL) for the USA and Canada.
The analyzer must be operated only with the prescribed power supply unit (Class II protection).
The analyzer is classified as Category II for over voltage and Degree 2 for pollution according to
IEC 664.
Opening covers or removing parts of the analyzer, except where this can be achieved manually
without the use of any tools, may expose voltage-carrying components. Connectors can be live.
Never try to maintain or repair an open analyzer that is carrying voltage.
If you suspect that the analyzer can no longer be operated safely, turn it off and take steps to
ensure that no one will subsequently attempt to use it. Make sure that only trained members of the
staff operate the IDEXX VetLab UA Analyzer.
ATTENTION: The data and information contained in this manual are accurate at the time of
printing. Any substantial changes will be incorporated in the next edition. In case of conflict
between this manual and information given in package inserts, the package inserts shall
take precedence.