Idexx VETLAB UA, Руководство оператора

Страница: 20 / 38

20
IDEXX VetLab
UA Analyzer Operator’s Guide
To Manually Send Results to the IDEXX VetLab Station
NOTE:
The IDEXX UA Strip results are sent automatically to the IDEXX VetLab Station, if connected.
Press 1. Menu .
Press 2. Memory .
Press 3. Send .
Press a send option: 4.
All t : sends all results in memory
Last Series
t
: sends the most recent series of results
Last One t : sends the most recent result
NOTE: It may take a few minutes for the UA analyzer to return to ready-to-measure mode.
Restarting the Sample Numbering
Each sample run on the UA analyzer is assigned a consecutive sequence number (1–100). At any
time, you can begin a new series starting at sequence number 1.
Press 1. Menu .
Press 2. New Ser .
Modifying the Interface Options
The Interface options let you specify whether the UA analyzer is operating in a stand-alone mode
or is connected to other analyzers.
Press 1. Menu .
Press 2. Setup 1 .
Press 3. Modes .
Press 4. Interf .
Press an interface option: 5.
Unidirectional (Unidir.):
t
The unidirectional interface option indicates that the
UA analyzer is operating as a stand-alone analyzer.
Bidirectional (Bidir.): t The bidirectional data transfer option is the default interface
option. It allows the analyzer to communicate with the IDEXX VetLab Station.
Press the 6. Start button to save the changes.
Printing Settings
The Printer options let you determine what is printed immediately after a test strip is read.
NOTE: If your analyzer is connected to the IDEXX VetLab Station and set to bidirectional mode,
results will be automatically transferred to the patient’s record and included in the patient’s
integrated diagnostic report.
Press 1. Menu .
Press 2. Setup 1 .
Press 3. Modes .
Press 4. Printer .