Idexx VETLAB UA, Руководство оператора

Страница: 31 / 38

IDEXX VetLab
UA Analyzer Operator’s Guide 31
Notification Cause Action
E6 Chip Error
E6 Please Wait The software code plug is
missing. Turn off the analyzer. Open the
cover by pressing the raised
dots immediately below and to
the right of the paper slot. Insert
the software code plug. Power
on the analyzer and wait for the
self-check process to complete.
The software code plug is
not inserted properly or is
damaged. Turn off the analyzer. Open the
cover by pressing the raised
dots immediately below and
to the right of the paper slot.
Remove the software code
plug and reinsert. Power on the
analyzer and wait for the self-
check process to complete.
E7 Missing Tray The test strip tray is not inserted
properly. Turn off the analyzer and
remove the test strip tray. With
the retaining bar nearest to you,
reinsert the tray so that the edge
of the tray is flush with the edge
of the analyzer. Power on the
analyzer and wait for the self-
check process to complete.
E8 Tray Position Error
E9 Wrong Tray Error The test strip tray needs to be
cleaned or is damaged, or an
LED on the phototransistor is
defective. Turn off the analyzer and
remove the test strip tray.
Carefully clean and dry the tray
(for instructions, see “Cleaning
the Test Strip Tray” on page 25).
If the notification persists,
contact IDEXX Technical
Support to obtain a relacement
test strip tray.
E10 Light Barrier Error The light barrier used to control
the position of the test strip tray
is defective or the tray transport
is blocked. Turn off the analyzer and
remove the test strip tray. With
the retaining bar nearest to you,
reinsert the tray so that the edge
of the tray is flush with the edge
of the analyzer. Turn on the
analyzer and wait for the self-
check process to complete.
If the notification persists,
contact IDEXX Technical
Support to obtain a replacement
test strip tray.