Ideum MT-50, Инструкция по сборке

Страница: 30 / 40

MT-50 Multitouch Table DIY Building Instructions–Version 1.2 - 4/5/11 - Page 30
3. Turn on the device that is on the CONTROL OUTLET. If the
SWITCHED OUTLETS turn on, you’re done.
Do not force the adjustment dial to turn more than 1 complete turn.
The Side Panels
The MT-50 shipped with powder coated cold-rolled steel panels. This
worked out excellent in busy public areas, as the panels are extremely hard
to damage, and easy to clean with the powder coat.
Below are the specifications for the side and end panels. We had these
custom made locally with a metal fabricator. These specifications can also
be used with any other material that you choose to use. The steel panels
are attached to the main Bosch frame with M5 button head screws and
8mm T-nuts.