Ideum MT-50, Инструкция по сборке

Страница: 4 / 40

MT-50 Multitouch Table DIY Building Instructions–Version 1.2 - 4/5/11 - Page 4
Assembling the Aluminum Frame
The main frame for the MT-50 is made of Bosch aluminum. The entire kit
for the MT-50 can be purchased from our Bosch Supplier in the United
States, Pacific Integrated Handling. If you would like to order the kit, please
contact Marianne Scarafiotti (or someone in her office) and let them know
you’d like the Ideum MT-50(200-05320) kit.
Pacific Integrated Handling Inc
Marianne Scarafiotti
480-379-0100 (phone)
Ideum MT-50(200-05320) kit
The kit will come with all the needed aluminum strut, screws, T-nuts, and
gussets that are needed to assemble the aluminum frame.
If you have ever played with an Erector set, you will be able to put together
the Bosch aluminum frame very easily.
To assemble, you will need the following tools:
1 Metric 2.5 Hex Key
1 Metric 4 Hex Key
1 12mm Socket w/ wrench
The different thicknesses of aluminum strut will be referred to in
millimeters. For the most part, the sizes in this kit are 45x45mm,
30x30mm, 20x20mm, and 20x40mm. This size convention also works for
the Gussets (the triangular pieces that are used to connect strut). There
will be 45mm gussets, 30mm, and 20mm.