Ideum MT-50, Инструкция по сборке

Страница: 33 / 40

MT-50 Multitouch Table DIY Building Instructions–Version 1.2 - 4/5/11 - Page 33
Tracking Software
Once all the systems are up and working, you will need to install some
camera based tracking software.
On the MT-50, we used NuiTeq’s Snowflake Suite. This software
supported three PT Grey cameras and offered an easy way to get the
cameras stitched and calibrated. You can download a demo of Snowflake
Suite at http://nuiteq.com/
Alternatively, there is an excellent open source project called CCV that
NUI Group Community has developed. You can check out CCV at
http://ccv.nuigroup.com/ .
This software package is free of charge. Unfortunately, with the camera set
up the MT-50 uses, you will not currently be able to use 3 PTGrey cameras
with CCV. There are other solutions though, and are quite a bit cheaper.
You can have 4 PS3Eye cameras running in the table and will work well
with CCV. Modified PS3Eye cameras can be purchased online though Peau
Productions http://peauproductions.com .
Within the NUI Group Forums http://nuigroup.com/forums/ you can find
lots of information regarding CCV.