Identivision IIP-CB3100FWL, Руководство по установке

Страница: 19 / 61

19
Regular
：The DVR
Performs the regular recording in the set time section. The video file
type is “R”.
Detect: Trigger the “motion detect”, “camera mask” or “video loss” signal. When above alarm is
set as opening recording, the “detection recording” state is on. The video file type is “M”.
Alarm: Trigger the external alarm signal in the set time section. When above alarm is set as
opening recording, the “detection recording” state is on. The video file type is “A”.
Remark
：
related alarm setting, please refer to chapter 4.3 alarm part.
4.2.2 Snapshot storage
Setup snapshot parameters for different channels. At first time its set for 24hours snapshot
continuously, please go to Main Menu->Record->Snapshot Storage for appropriate settings.
Remark
：
Device installed with TF card and set partition, Snapshot should more than 1G, then
device can normally take snapshot.
（
detail please refer to chapter 4.5.1 HDD manage
）
Pic: 4.2 Snapshot setting
【
PreSnapshot
】
to take picture of 1-30 pcs before recording happens, default is 5 pcs
【
Record
】
Set record type, "Timing
”
,
„
Manual" and "Stop"
Timing: Realize snapshot according to record type (regular, detect and alarm) and period.
Manual: No matter what is the current status, once choose "manual
”
, it will have snapshot at
related channels.
Stop: No matter what is the current status, once choose "stop", it will stop snapshot at
related channels.
【
Period
】You can s
et normal record period, it only startup Snapshot Storage at set period.