Identivision IIP-CB3100FWL, Руководство по установке

Страница: 18 / 61

18
4.2 Record
Device do operation regarding record, including: record & snapshot .
4.2.1 Record setting
Set IPC parameter, when firstly turn on, system is default with record for 24hours. You can go to
【
Device Config
】
>
【
Record
】
>
【
Record
】
to do related setting.
Remark: Device installed with TF card and set it as Read/Write, and then it can normally record.
(Detail please refer to chapter 4.5.1 HDD manage)
Pic: 4.1 Record setting
【
Length
】
to set the length of each recording file between 1-120min, default is 60min
；
【
PreRecord
】
to record 1-30s before motion happens (time length may slight different due to bit
rate)
【
Record control
】
set recode type: timing, manual & stop
Timing : Record according to the set video type (regular, detect and alarm) and time period.
Manual
：
Click the button and the according channel is recording no matter the channel in any
state
；
Stop
：
Click the stop button and the according channel stops recording no matter the channel in
any state.
【
Period
】
Set the time section of common recording, the recording will start only in the set range
；
【
Record type
】
Set recording type: regular, detect or alarm.