Identivision IIP-CB3100FWL, Руководство по установке

Страница: 9 / 61

9
3 IE log-in basic operation
Remark: keys in grey means do not support
3.1 Boot
Connect to power, and then IPC is auto boot.
Remark
：
1. Make sure that the input voltage corresponds with the switch of the IP Camera power supply.
2. Power supply demands: 220V±10% /50Hz.
Suggest using the UPS to protect the power supply under allowable conditions.
3.2 Reboot
Reboot IPC is divided into soft reboot and hard reboot. Soft switch please enter
【
Devicecfg
】
>
【
Advanced
】
choose
【
reboot
】；
Hard reboot, to cut off power and reconnect it to reboot
device
Illustrate
：

Power-off & recover function
If IPC shuts down abnormally, when it is under recording, after reboot, it wills auto-save the
record info before shutdown and restore to status before shutdown.

Change TF card
when change TF card, please cut off power supply firstly.

Change battery
IPC is using button cell battery, need regularly check system time, if time is not accurate,
then, and need to change battery. Suggest to change, it once a year by professional
maintainer and using the same model of battery.
3.3 Log-in
When device turns on normally, need to log-in before operation, system will base on the authority
of log-in user to provide related function.
Default IP address
：
192.168.1.10
，
subnet mask
：
255.255.255.0
，
gateway
：
192.168.1.1
There are 3 factory users : admin
、
guest
、
default
，
default password is none , admin is preset as super authority user, guest and default is preset with
authority of preview and playback, admin and guest user can modify password but not authority,
default is the user default log-in, can modify authority but not password