manualshive.com logo in svg
background image

 

VISIBILITY DELIVERED. 

PAGE 2 OF 15 

Proprietary Notice 

This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or 
disclosed to other parties in whole or in part without prior written authorization from IDENTEC SOLUTIONS. 

 

Disclaimer and Limitation of Liability 

IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents do not make 
any express or implied warranties or representations with respect to such information including, without 
limitation, warranties as to non-infringement, reliability, suitability for a particular purpose and accuracy. 
IDENTEC SOLUTIONS shall not under any circumstances be liable to any person for any special, incidental, 
indirect or consequential damages, including without limitation, damages resulting from use of or reliance on 
information presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in 
advance of the possibility of such damages. 

 

Trademarks 

―IDENTEC SOLUTIONS‖,  ―Intelligent Long Range‖, ―ILR‖ and the stylized ―i‖ are registered trademarks and  
―i-Q‖, ―i-D‖, ―i-B‖, ―i-CARD‖, ―i-PORT‖, ―i-LINKS‖, ―Visibility Delivered‖ are trademarks of IDENTEC 
SOLUTIONS, Inc. and/or IDENTEC SOLUTIONS AG. 

 

Copyright Notice 

Copyright © 2011 IDENTEC SOLUTIONS. All rights reserved. 
No part of this document may be reproduced or transmitted in any form by any means, photographic, 
electronic, mechanical or otherwise, or used in any information storage and retrieval system, without the prior 
written permission of IDENTEC SOLUTIONS. 
 
 
 
 
 
 
 
 
Issue 1 / August 2011 
– 29. September 2011 – 
 
IDENTEC SOLUTIONS AG,  
Millennium Park 2, 6890 Lustenau, Austria 
 
Phone: +43 5577 87387- 0, Fax: +43 5577 87387-15 
E-Mail: [email protected] 
www.identecsolutions.com 
 
Subject to alteration without prior notice. 
© Copyright IDENTEC SOLUTIONS 2010 
 

Содержание i-B350 S
















Отзывы: