IDEC SmartRelay FL1A-H12RCE, Руководство пользователя

Страница: 18 / 209

Installing and Wiring IDEC SmartRelay
2-2
IDEC SmartRelay User’s Manual
2.1 Installing/Removing IDEC SmartRelay
Dimensions
The dimensions of IDEC SmartRelay comply with
DIN 43880.
IDEC SmartRelay must be snapped onto a DIN rail with a
width of 35 mm to DIN EN 50022.
Width of IDEC SmartRelay:
•
IDEC SmartRelay is 72 mm wide, which corresponds to
the size of all modules.
Note
We will show you how to install and uninstall IDEC SmartRelay
with the aid of an illustration of the FL1A-H10RCB. The
measures described also apply to all other IDEC SmartRelay
modules.
Installing
To install IDEC SmartRelay on a DIN rail, proceed as
follows:
1. Place IDEC SmartRelay on the rail
2. Swivel it onto the rail so that the snap catch on the back
of IDEC SmartRelay engages.
Depending on the type of DIN rail used, the snapping
mechanism may be a bit stiff. If it is too stiff and IDEC
SmartRelay won’t snap on, you can pull the snap catch
down a little as you do when uninstalling IDEC SmartRelay
(as described below).