IDEC FC4A-C10R2, Руководство пользователя

Страница: 133 / 525

5: S
PECIAL
F
UNCTIONS
« FC4A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
» 5-13
Two-phase High-speed Counter Timing Chart
Example: Reset input I2 is used. Q1 is designated as a comparison output.
Reset Input I2
Reset Value D8046
0
1
2
8
Current Value D8045
1 scan time
The D8046 value at this point becomes the
reset value for the next counting cycle.
Phase A Input I0
Phase B Input I1
65533 5
Reset Status M8130
3
Gate Input M8031
Comparison Output Q1
Comparison Output Reset M8030
1 scan time
Current Value Over flow M8131
1 scan time
Current Value Under flow M8132
7
6
5
4
3
65532
65533
65534
65535
Under flow Over flow
•
When reset input I2 is turned on, the D8046 reset value is set to the D8045 current value, then reset status
M8130 turns on for one scan. If reset input M8032 is turned on, reset status M8130 does not turn on.
•
While gate input M8031 is on, the two-phase high-speed counter counts up or down depending on the phase dif-
ference between phase A (input I0) and phase B (input I1).
Phase A
(Input I0)
Phase B
(Input I1)
Count Up (Increment)
Phase A
(Input I0)
Phase B
(Input I1)
Count Down (Decrement)