IDEAL Vanguard L 340, Установка и обслуживание

Страница: 5 / 40

5 Vanguard L -
Installation & Servicing
GENERAL
van 5652
Vanguard 'L'
Gas and Fuel Oil
PI No.
1312CP5965
Destination Countries: GB, IE
INTRODUCTION
The Vanguard L boilers are a range of steel shell pressure jet boilers offering high efficiency operation, ease of maintenance, fuel
flexibility and low emissions.
Suitable for oil or gas operation the Vanguard L range is supplied in a choice of 22 standard models, rated in outputs from 340kW to
7000 kW. The range has a maximum operation pressure of 6 bar.
Designed with a large combustion chamber that is positioned in the lower part of the heat exchanger, the Vanguard L range ensures
maximum heat transfer efficiency (up to 92.5% net).
Through the use of an increased number of flue ways tubes which are positioned in the hottest area of the heat exchanger and
constructed from a thicker steel construction than that of traditional boilers.
Burners
The Vanguard L boiler range is designed for the application of proprietary pressure jet burners operating with either gas or oil. A burner
matching matrix held at Ideal Boilers enables the selection of the burner type at the point of purchase.
The burner type and controls selection will provide the option of two stage or modulating firing.
Duty
The range of boiler is suitable for: combined indirect pumped domestic hot water and central heating systems; independent indirect
pumped domestic hot water or central heating systems.
Fully pumped systems may be open vented or sealed.
The range of boilers is NOT suitable for:
1. Gravity DHW systems.
2.
Gravity heating systems.
3. Direct domestic hot water supply.