IDEAL Response FF80, Установка и обслуживание, Страница: 3 / 64

3
Response FF80
- Installation
PERFORMANCE DATA
Boiler Response FF80
Gas supply type & connection 2H-G20-20mbar, Rc1/2
Inlet connection Domestic Hot Water 15mm copper
Outlet connection Domestic Hot Water 15mm copper
Flow connection & Central heating
Return connection 22 mm copper
Flue terminal diameter mm (in.) 100 (4)
Max. working pressure (sealed systems) bar (lb/in
2
) 2.65 (38.5)
Max. DHW water inlet pressure bar (lb/in 2 ) 10.0 (145.0)
Min. DHW water inlet pressure bar (lb/in 2 ) 0.5 (7)
Electrical supply & loading 230 V ~ 50 Hz, 160W max
External fuse rating 3A
Internal fuse rating PCB 38 F1: T2A PCB 38 F2: H2A PCB 37 F1: H2A
Water content Central Heating litre (gal.) 2.3 (0.50)
Domestic Hot Water litre (gal.) 0.48 (0.11)
Dry Weight kg (lb.) 50 (110)
Boiler size Height mm (in.) 640 (25
3/16
)
Width mm (in.) 436 (17
1/8
)
Depth mm (in.) 278 (10
15/16
)
Table 1 - General Data
Table 2 - Performance Data - CENTRAL HEATING
Response FF80
Max Min
Burner pressure (HOT) mbar (in.w.g.) 8.3 (3.4) 3.7 (1.5)
Input based on nett CV kW (Btu/h) 19.8 (67 500) 12.6 (43 000)
Input based on gross CV kW (Btu/h) 22 (75 000) 13.9 (47 500)
Output kW (Btu/h) 17.6 (60 000) 11.7 (40 000)
Gas consumption (Hot) l/s (ft
3
/h) 0.568 (220) 0.359 (139)
Table 3 - Performance Data - DOMESTIC HOT WATER
Response FF80 (Maximum)
Burner pressure (HOT) mbar (in.w.g.) 14.8 (5.9)
Input based on nett CV kW (Btu/h) 26.4 (90 000)
Input based on gross CV kW (Btu/h) 29.3 (100 000)
Output kW (Btu/h) 23.4 (80 000)
Gas consumption (Hot) l/s (ft
3
/h) 0.757 (293)
Flow 35
0
C. temp. rise l/m (gpm) 9.6 (2.1)
Domestic hot water specific rate l/m (gpm) 11.2 (2.4)
Key to symbols
IE = Ireland (Countries of
GB = United Kingdom destination)
PMS = Maximum operating pressure of water
C13 = A room sealed appliance designed for connection via ducts to a
horizontal terminal, which admits fresh air to the burner and
discharges the products of combustion to the outside through
orifices which, in this case, are concentric. The fan is up stream
of the combustion chamber.
I
2H
= An appliance designed for use on 2nd Family gas, Group H only.
Note. Gas consumption is calculated using a
calorific value of 38.7 MJ/m
3
(1038 Btu/ft
3
) gross or
34.9 MJ/m 3 (935 Btu/ft 3 ) nett
To obtain the gas consumption at a different calorific
value:-
a. FOR L/S - divide the gross heat input (kW) by
the gross C.V. of the gas (MJ/m 3 )
b. FOR FT
3
/H - divide the gross heat input (Btu/h)
by the gross C.V. of the gas (Btu/ft
3
)
CAUTION. To avoid the possibility of injury during the installation, servicing or cleaning of
this appliance care should be taken when handling edges of sheet steel components.