IDEAL Mexico Slimline CF3/40, Руководство по установке и обслуживанию

Страница: 19 / 40

19
Mexico Slimline CF 3/40 & 3/50 -
Installation
INST
ALLA
TION
INSTALLATION
A. ELECTRICAL INSTALLATION
1. Checks to ensure electrical
safety should be carried out by
a competent person.
2. ALWAYS carry out preliminary
electrical system checks, i.e.
earth continuity, polarity,
resistance to earth and short
circuit using a suitable test
meter.
C. WATER CIRCULATING
SYSTEM
1. The whole of the system
should be thoroughly flushed
out with cold water WITHOUT
the pump in position. Ensure
that all valves are open.
2. With the pump fitted the
system should be filled and air
locks cleared. Check for
water soundness.
B. GAS INSTALLATION
1. The whole of the gas installation, including
the meter, MUST be inspected and tested
for soundness, and purged in accordance
with the recommendations of BS. 6891.
2. Purging air from the gas installation may
be expedited by loosening the union on
the gas service cock on the boiler and
purging until gas is detected.
3. Retighten the union and check for gas
soundness.
WARNING. Whilst effecting the required gas soundness test and purging air from the
gas installation, open all windows and doors, extinguish naked lights and DO NOT
SMOKE.
21 FITTING THE CASING
5. Insert the thermostat phial into the thermostat
pocket. Take care not to kink the thermostat
capillary as it is unwound, and secure it with the
split pin as shown.
6. Replace the control box cover and refit the control
panel using the screws previously removed.
7. Refit the grille assembly.
1. Offer up the LH side panel and secure
the panel to the baseplate and collector
hood.
2. Repeat step 1 to refit the RH side panel.
3. Place the top panel on top of the side
panels.
4. Secure the top panel to the side panels.
IMPORTANT.
Wiring within the boiler casing must be
neatly secured with the cable straps
provided and MUST NOT be allowed to
touch the burner front plate, or the cleanout
cover and the collector hood.
22 COMMISSIONING AND TESTING