IDEAL Mexico Slimline CF3/40, Руководство по установке и обслуживанию

Страница: 15 / 40

15
Mexico Slimline CF 3/40 & 3/50 -
Installation
INSTALLATION
INST
ALLA
TION
Connect the flue pipe to the flue outlet.
The flue pipe spigot and socket connections
should be sealed with fibreglass rope or
similar, and suitable fireclay cement.
Notes.
a. The boiler flue connection outlet size is
suitable for flue pipe conforming to BS
567.
If sheet steel flue pipe is fitted, a suitable
adaptor must be used.
b. To facilitate installation and subsequent
disconnection it is recommended that a
slip or split socket be included in the flue
installation, adjacent to the boiler flue
outlet connection.
c. A minimum of 600mm (2') of vertical flue
directly above the boiler should be
provided.
WARNING
The appliance MUST be efficiently earthed.
A mains supply of 230 V ~ 50 Hz is required.
All external controls and wiring MUST be suitable for mains
voltage.
Wiring should be in 3-core PVC insulated cable NOT LESS
than 0.75 mm
2
(24 x 0.2 mm) to BS.6500, Table 16.
14 INTERNAL WIRING
Flow and pictorial wiring diagrams are shown
in Frames 15 and 16. A schematic wiring
diagram is included in the Lighting Instruction
label.
1. Remove the securing screw and lift off the
control box cover.
2. Route the electrical leads into the box and
wire into the terminal strip, as shown.
Notes.
a. Secure each lead with one of the cable
clamps.
b. The mains lead connection MUST be
made so that, should the lead slip from its
anchorage, the current conductors
become taut before the earthing
conductor.
13 ELECTRICAL CONNECTIONS
12 FLUE CONNECTION
Wiring external to the boiler MUST be in accordance with
current l.E.E. (BS 7671) Wiring Regulations and local
regulations.
Connection must be made in a way that allows complete
isolation of the electrical supply - such as a double pole
switch, having a 3mm (1/8") contact separation in both poles,
or a plug and socket serving only the boiler and system
controls. The means of isolation must be accessible to the
user after installation.
The fuse rating should be 3A.