IDEAL FAST-WAY Si-Low 210 A1, Руководство пользователя

Страница: 141 / 149

Operation & Maintenance Manual
53
Cyclo® BBB4
Cyclo® BBB4
Cyclo® Portion Disassembly/Assembly
Disassembly Procedure
Disassembly/Assembly
The Bevel Gear portion is designed for lower speeds and therefore has lower operating cycles when compared to the Cyclo® input assembly,
therefore in most cases does not require rebuilding. Always consult our specialized factory and warehouses for overhaul of gearmotors and
reducers. Experience is necessary for proper overhaul.
The Cyclo® portion has signifi cantly higher operating cycles than the Bevel Gear portion, rebuild and repair is a convenient way to extend the
useful life of your gearbox.
Cyclo® repairs should be conducted by experienced personnel to prevent damage to components or persons.
Cyclo® Portion – General Disassembly
1
Before starting the disassembly process, Sumitomo recommends draining and properly disposing of all lubrication.
2
Carefully remove the entire Cyclo® BBB4 from the driven shaft by following the instructions outlined in the Removal From Driven Shaft section
of this manual.
3
While carefully supporting the entire unit, place the unit on a level work surface so
that the high speed portion (Cyclo® portion) is facing down.