IDEAL FAST-WAY Si-Low 210 A1, Руководство пользователя

Страница: 123 / 149

Operation & Maintenance Manual
35
Cyclo® BBB4
Cyclo® BBB4
Grease Replenishment and Draining Procedure
Procedure for adding grease to grease-lubrication models (excluding maintenance-free models)
1. Remove the grease discharge plug from the outside cover.
2. Add grease with a grease gun from the grease nipple in the inside cover section or motor connection cover.
3. Insert the grease discharge plug.
Add grease while manually rotating the input shaft to ensure proper, uniform circulation.
Add grease slowly , to prevent internal pressure and possible seal damage.
Do not add more grease than the amount shown in Table 28 and 29. Adding too much grease may cause the grease temperature
to rise, or force the grease to leak into the motor.
Always consult factory and warehouses for overhaul of gearmotors and reducers. Familiarity with Cyclo® products is necessary for proper
overhaul.
Hours of
operation
Replenishment
interval
Remarks
10 hr. max./day 3 - 6 months Shorten the supply interval when
the operating conditions are
severe or the frame size is large
10 - 24 hr. max./day 500 - 1000 hours
Change
Interval
Remarks
Every 20,000 hrs
or 3–5 years
Shorten the supply interval when
the operating conditions are
severe or the frame size is large
Table 30. Grease Replenishment Intervals Table 31. Grease Replacement Intervals
Lubrication,
continued
Grease Replenishment and Draining Procedure, Grease Replacement
Grease Replacement
• Maintenance free units may be safely operated for an extended time because it is sealed with maintenance free grease. Tables
28 & 29 are provided for generalized reference.
• Adequate care should be taken to ensure the lubricant continues to meet the specifi ed lubrication characteristics.
• If refurbishment or rebuild is required, do not add more grease than the amount shown in Tables 28 and 29.
• Adding too much grease may cause the grease temperature to rise or force the grease to leak into the motor.
• Consider implementing a lube analysis program to ensure lubricant continues to operate at peak performance.
• Follow your lubrication providers analysis recommendations to ensure reducer performance.
• Always consult factory and warehouses for overhaul of gearmotors and reducers. Experience is necessary for proper overhaul.