IDEAL Falcon GTS 4, Установка и обслуживание

Страница: 12 / 36

12
Falcon GTS -
Installation & Servicing
INSTALLATION
2
1
5
4
3
150
FAL5820
13 PREPARING THE FRONT AND REAR SECTIONS
Installing the height convertor and the adjustable feet on the
rear section.
1. Fix the adjustable feet (supplied in the bag containing the
casing fasteners) onto the height converters.
1
3
2
FAL5819
17
FAL5818
1
2
2. Place the rear section on the floor and fix the height
converter with two M10 x 25 bolts, serrated washers and
nuts using a 17mm spanner.
3. Place the front section on the floor (with the groove facing
up) and fix the height converter with two M10 x 25 bolts,
serrated washers and nuts using a 17mm spanner.
14 PREPARING THE SECTIONS
1. Support the rear section with a wooden block.
2. Place a block with a height of approx. 150mm (the length
varies from 320 - 820mm depending upon the number of
sections) to support intermediate sections.
3. Clean the bores and nipples with kerosene/paraffin.
4. Coast them with the coating material supplied.
5. Push in the two nipples moderately.
6. Place the intermediate and front sections on the floor, groove
upwards.
7. Prepare the silicone cartridge.
8. Put a drop of silicone at about every 200mm of the groove of
the intermediate and front sections.
FAL5821
8
8
INST
ALLA
TION