IDEAL Falcon GTS 4, Установка и обслуживание

Страница: 18 / 36

18
Falcon GTS -
Installation & Servicing
INSTALLATION
26 FITTING THE SIDE PANEL AND INSULATION SUPPORTS
1. Place the two lower side panel
supports into position (using the
round hole towards the front and the
oblong hole towards the back of the
boiler).
2. Fix:
a. to the front with a screw, serrated
washer and nut.
b. To the rear with a screw, LL washer
and nut.
3. Screw the screws home into the notch
of the front height converters.
4. Fix the insulation support with screws
to support the front of the insulation
material.
27 ASSEMBLING THE SIDE PANELS
1. Loosely fit the screws and serrated
washers (a) to secure the control panel
support and (b) to secure to the front
cross piece. Refer to Frame 26.
2. Fit the cable clip on the opposite side to
the furnace door hinges (in compliance
with the requirements of European safety
standards).
* Only for High/Low control panel FM196:
Fit the 2 cable clips. The second cable
clip is delivered in package FM196.
3. Insert the side panels from the bottom into
the notches on the lower side panel
supports.
4. Slightly lift the panels and engage the
loose screws into the notches on the front
cross piece
5. Tighten the screws into the front cross
piece.
fal8531b
2b
B
4
2a
1
3
GTS4 GTS5-8
3
3
4
5
FAL8532b
INST
ALLA
TION