Page 7 of 17 5/11/2012
e.
Enter 5143631030
DEL./PAUSE
(hold for 2 seconds until the letter F
appears on the screen, then enter
230.
f.
Press
ARM/DISARM
button to confirm.
g.
Press
PROG
button eight (8) times to exit set-up mode.
6. TO PROGRAM SIREN ON/OFF
The auto-dialer has been factory pre-set with the siren ON. To change this to OFF:
a.
Enter password followed by
PROG
button four (4) times.
b.
The "
" icon will flash on the auto-dialer screen. (Fig.8)
c.
Press
ARM/DISARM
to confirm.
d.
Using
*/UP
or
#/DOWN
buttons to select SOUND OFF. Followed by
ARM/DISARM
button to confirm.
e.
Press
PROG
button six (6) times to exit the set-up mode.
7.
TO PROGRAM AUTO CALL FUNCTION ON/OFF
The auto-dialer has been factory pre-set with the call option ON. If you do not want the
auto dialer to call out change this to OFF:
a.
Enter password followed by
PROG
button five (5) times.
b.
The "
" icon will flash on the auto-dialer screen. (Fig.9)
c.
Press
ARM/DISARM
button to confirm.
d.
Using
*/UP
or
#/DOWN
buttons to
select call OFF followed by the
ARM/DISARM
button to confirm.
e.
Press
PROG
button five (5) times to exit the set-up mode.
8. TO PROGRAM AUTO DIALLING CYCLE
.
